TV and Monitor Screen Problems: How to Find the Cause and Fix It

Screen problems on a TV or computer monitor tend to look alarming, but many come down to a setting, a cable or the device plugged into the screen. The trick is reading the symptom correctly, because a “No Signal” message, a flicker, a line and a dark corner each point somewhere different.

Quick answer: Start by finding out whether the problem is the screen or what feeds it. Open the TV’s or monitor’s own menu. A normal menu suggests an input, cable or source issue but does not rule out screen faults. Problems visible in the menu suggest an internal display issue. Then use the table below to jump to the guide for your exact symptom.

Large flat-screen TV in a modern living room

Find your problem

SymptomMost likely areaFull guide
Monitor says “No Signal”Input, cable, computerMonitor says no signal
TV says “No Signal” on HDMIInput, cable, source deviceHDMI no signal on a TV
Monitor flickers or blinks blackDriver, app, cable, refresh rateMonitor screen flickering
Horizontal lines across the screenCable, settings or panelHorizontal lines on a monitor
Vertical lines down the screenCable, graphics or panelVertical lines on a monitor
TV has sound but a black screenSource, connection or internal hardwareTV black screen with sound
One side of the TV is darkBacklight (LCD only) or panelTV screen dark on one side
A dot that never changesDead or stuck pixelDead or stuck pixels
Picture but no sound over HDMIAudio output settingsNo sound from your TV over HDMI
Vizio TV keeps changing inputsInput and connected-device settingsVizio TV keeps switching inputs

Five checks that solve many screen problems

  1. Check the menu. Press Home or Menu on a TV remote, or the menu button on a monitor. A normal-looking menu suggests the screen can display an image.
  2. Confirm the input. Make sure the TV or monitor is set to the exact HDMI, DisplayPort or USB-C port the cable uses.
  3. Reseat or swap the cable. Plug it in firmly at both ends, remove adapters and switches, and try another cable you know works.
  4. Power-cycle everything. Unplug the screen and the source device for at least 10 seconds, then turn on the source first.
  5. Test another source. Connect a different computer, console or streaming device. If another source works, investigate the original device, cable and connection.

When the screen shows nothing

A “No Signal” message is good news in a way: the screen has power and is waiting for video. Fix the input, cable and source device. On a computer, also check that it isn’t asleep and that the monitor is connected to the graphics card’s ports if the PC has one. On a TV, a black screen with sound working is different. Sound confirms some functions are working. An invisible menu may indicate a backlight, panel, power or other internal fault.

When the picture flickers

On Windows, flickering may be caused by a display driver or incompatible app. Microsoft recommends using Task Manager to help distinguish them. Cables and refresh rate settings are the next suspects. On a TV, flicker can come from energy-saving or motion settings, a loose HDMI cable or a failing backlight. Turn off eco and motion-smoothing modes first, then test with a different source and cable. If the TV’s own menu flickers too, contact the manufacturer or a repair service.

When lines or dark areas appear

Lines that move, change or disappear when you wiggle the cable usually come from the connection or the graphics output. Lines or dark areas visible in built-in tests suggest internal faults. On LED-backlit LCD TVs, a dark half may indicate backlight failure or panel damage. OLED TVs have no backlight, but they can develop burn-in, a faint permanent image left by static content such as logos.

When single dots won’t change

A consistently black dot may be a dead pixel, while a persistent colored or bright dot may indicate a stuck pixel. Clean the screen first to rule out dust, then check the manufacturer’s pixel policy, such as Dell’s pixel guidelines, which decides whether the screen qualifies for replacement under warranty.

Use the screen’s built-in tests

Many monitors run a self-test screen when you unplug the video cable and turn them on, as described in Dell’s monitor troubleshooting guide. A self-test image confirms basic display functionality. Many TVs have a picture test in their support or diagnostics menu. On many Samsung TVs the picture test is under Settings > Support > Device Care > Self Diagnosis > Picture Test; older models may not have Device Care. See Samsung’s support guide. Use built-in diagnostics to investigate abnormalities. A failed test suggests an internal fault; passing does not exclude intermittent problems.

When to repair or replace

  • Under warranty: contact the manufacturer or retailer before opening anything. Damage caused by unauthorized repairs may not be covered.
  • Backlight failure on a TV: a repair shop can quote replacing the LED strips. Weigh it against the TV’s age and price.
  • Cracked or damaged panel: panel replacement can be expensive, so compare a repair estimate with the cost of a new screen.
  • Safety: TVs and monitors contain high-voltage parts. Leave internal repairs to qualified technicians.

Related screen guides

Frequently asked questions

What are the most common TV screen problems?

No signal or a black screen, flickering, lines, dark areas from backlight failure, and dead or stuck pixels. Many TVs also lose sound over HDMI while the picture works.

How do you tell if a TV is burnt out?

Persistent black screens or dark areas, even in the TV’s own menu, may indicate internal failure. No standby light or sound may indicate a power issue.

What is the black screen of death on a TV?

A persistent blank screen, sometimes with working sound, caused by connection, software or hardware problems. See TV black screen with sound.

How can I tell if a TV screen is damaged?

Physical damage often shows as cracks, spreading lines or ink-like blotches that stay in place in every input and in the TV’s own menu.

Is it worth fixing a TV or monitor screen?

Settings changes and basic troubleshooting are often free, but replacement cables may cost money. Backlight repairs can be worthwhile on a newer or larger TV. For a damaged panel, compare a repair estimate with the cost of a replacement.

How we researched this guide

This guide draws on Samsung’s TV support articles, Dell’s monitor support pages and Microsoft’s screen flickering guide, reviewed on November 17, 2026. We did not test these steps on a device. Menus and built-in tests vary by brand, model and year.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top