TV Screen Dark on One Side? Causes and What to Do

One half of the TV looks normal and the other looks dim, shadowy or almost black. It’s one of the more worrying things a TV can do, because it often points to hardware. Still, a few checks take only minutes and help identify possible software or settings-related causes before you think about repair.

Quick answer: If your TV screen is dark on one side, restart it by holding the power button or unplugging it, disconnect external devices, and run the TV’s built-in picture test. If the dark area persists across built-in menus and the picture test, an internal TV fault is likely, but professional diagnosis is needed. Contact the manufacturer or a repair service, especially if the TV is under warranty.

Flat-screen TV turned on in a living room

This guide is part of our series on fixing TV and monitor screen problems.

Why one side of a TV goes dark

LED TVs are LCD TVs that use LED backlights. A backlight failure or another internal display fault can cause localized dark areas. Samsung says this kind of split screen typically indicates a display hardware fault, such as a damaged panel or faulty backlight.

LCD and LED TVs use backlights. OLED TVs have self-lighting pixels, so a dark section on an OLED can’t be caused by a failed backlight strip; contact the manufacturer for an OLED with this problem.

Is it the TV or the picture?

What you seeLikely cause
The dark area appears in every app, input and the TV’s own menuTV hardware: backlight or panel
The dark area appears only on one input or appThe source, cable or content
Cloudy or uneven patches only in dark scenesUneven backlight, which many LED TVs show to some degree
One half dark and the other half showing scattered pixels or noiseA panel or internal connection fault

1. Restart the TV

Follow your manufacturer’s restart instructions. On Samsung TVs, Samsung suggests holding the power button on the remote or TV for 10 seconds until the TV restarts. Alternatively, unplug the TV for a few minutes before reconnecting it.

2. Disconnect external devices

Unplug streaming sticks, game consoles and cable boxes, and plug the TV straight into a wall outlet rather than a power strip. If you use an external input, test with a different HDMI cable or port. If the dark side disappears, investigate the connected device, cable or HDMI port.

3. Run the picture test

A picture test shows a built-in image that doesn’t depend on any input. On many Samsung TVs it’s under Settings > Support > Device Care > Self Diagnosis > Picture Test; older models may not have Device Care. For this split-screen problem, Samsung also describes starting the test without the menu: turn off and unplug the TV, hold the TV’s power button for 30 seconds, then plug it back in and turn it on, and the test should start automatically. If the test doesn’t start, consult your model’s manual or contact support. Other brands have similar tests in their support or diagnostics menus. If the dark area shows up in the test image, an internal fault is likely.

4. Check picture settings

  • Switch to a standard picture mode and reset picture settings to default.
  • Turn off energy-saving modes and any ambient light or eco sensor.
  • If your TV has local dimming, try a different level. Local dimming changes brightness by zone and can make uneven scenes look worse.

5. Update the TV’s software

Install any available update. On Samsung TVs it’s under Settings > Support > Software Update > Update Now. An update may resolve software-related display issues, but it cannot repair faulty hardware.

6. Decide on repair or warranty

If the dark side remains after the picture test, contact the manufacturer, especially if the TV is under warranty. Out of warranty, a repair shop can tell you whether replacing the backlight strips is worthwhile. On larger TVs the strips sit behind the panel, so the job means taking the screen apart, and it involves electrical parts. It isn’t a safe first DIY project. Panel replacement can be expensive, so compare a professional repair estimate with the cost of a replacement TV.

If the whole screen goes black while sound keeps playing, see TV black screen with sound. For thin lines rather than a dark area, see vertical lines on a screen.

Frequently asked questions

Why is half my TV screen darker than the other?

A backlight or panel fault is a common possibility. A picture setting, the source or a software problem can also be responsible, and the checks above help identify those.

How do I fix a half-black screen on my TV?

Restart the TV, remove external devices, reset picture settings and run the picture test. If the dark half appears in the test, contact the manufacturer for diagnosis.

Can a TV that’s dark on one side fix itself?

A software glitch can clear after a restart, but a failed backlight strip won’t recover on its own.

How do you tell if a TV is burnt out?

If dark areas or a black screen appear even in the TV’s own menus and picture test, an internal fault such as the backlight or panel is likely, but a technician should confirm it.

What is the TV black screen of death?

An informal term for a blank screen, not a specific diagnosis. See TV black screen with sound.

How we researched this guide

This guide draws on Samsung’s support articles on split-screen and uneven backlight problems, reviewed on November 17, 2026. We did not test these steps on a device. Menu names and diagnostic tools vary by TV brand, model and year.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top