The show is playing, you can hear every word, but the screen is completely black. Sound confirms some TV functions are working, but video processing, settings, connections or display hardware may be faulty.
Quick answer: If your TV has sound but a black screen, press the remote’s Home or Menu button. If the menu appears, investigate the source or connection first: the input, the connected device and the HDMI cable. If it doesn’t, a TV-side issue becomes more likely, so power-cycle the TV and run a picture test if your TV has one. If every check fails, contact the manufacturer or a qualified repair service.

This guide is part of our series on fixing TV and monitor screen problems.
Start here: does the TV menu show up?
Press Home or Menu on the remote while the screen is black.
| Result | What it means | Go to |
|---|---|---|
| The menu appears on screen | Investigate the source or connection first | Steps 1 to 3 |
| The menu doesn’t appear, but sound keeps playing | A TV-side issue becomes more likely | Steps 4 to 7 |
This check comes from Samsung’s no-picture troubleshooting guide, which notes that a TV producing sound over a black screen could have a problem with the external device.
1. Check the source and input
- Make sure the TV is set to the input your device is plugged into.
- Turn the connected device off and on again.
- Try a different app or channel. Some streaming content shows black if the device and TV can’t agree on copy protection.
2. Reconnect or replace the HDMI cable
Reconnect each cable one at a time at both ends. On many Samsung TVs you can test the cable under Settings > Support > Device Care > Self Diagnosis > Signal Information > HDMI Cable Test. Availability and menu paths vary by model, and Samsung recommends the test for cables shorter than 6 feet. If the test fails, or your TV doesn’t have it, swap in another cable.
3. Try another device or port
Connect a different device, or move the cable to another HDMI port. If another device works using the same cable and port, suspect the original device or its settings.
4. Power-cycle the TV
Unplug the TV from the wall, wait at least a minute, and plug it back in. This may resolve temporary software problems that can leave the screen dark.
5. Check the picture settings
Skip this step if nothing is visible on screen.
- Look for an energy-saving or eco setting that dims the screen, and turn it off.
- Turn up the backlight or brightness setting if the screen is very dark rather than fully black.
- Check that a “picture off” or audio-only mode isn’t on. Some TVs have one for listening to music.
6. Run the TV’s picture test
Many TVs have a built-in picture test. On Samsung models it’s under Settings > Support > Device Care > Self Diagnosis > Picture Test, though the path varies by year. If the menu is inaccessible, skip the picture test. A faulty picture test suggests a TV-side problem, not necessarily hardware failure.
7. Check the backlight
A common technician check on LCD and LED TVs: with sound playing, shine a flashlight close to the screen at an angle. A faint image suggests a backlight-system fault. OLED TVs have no backlight, so this check doesn’t apply to them. A backlight fault is a hardware repair. Opening the TV involves high-voltage parts, so leave it to a qualified repair service or the manufacturer, especially if the TV is under warranty.
8. Update the software
If you can reach the menu, install any available software update for the TV and the connected device, then restart both.
A screen that’s dark on only one part, rather than fully black, is covered in TV screen dark on one side. If the TV says “No Signal” instead, see HDMI no signal on a TV.
Frequently asked questions
What should I do if my TV screen is black but there is sound?
Press Home or Menu. If the menu shows, check the input, device and cable. If it doesn’t, power-cycle the TV, check picture settings, and run a picture test.
What is the black screen of death on a TV?
It’s an informal name for a TV that powers on and may play sound but shows no picture at all, even in its own menus. It describes a symptom, not a specific diagnosis.
How do I reset my TV when the screen is black?
Unplug it for at least a minute, then plug it back in. Factory reset procedures vary by model. Contact the manufacturer for instructions if the screen remains black.
How can I tell if a TV is burnt out?
If the TV makes sound but its own menu and picture test stay black, and, on an LCD or LED TV, a flashlight shows a faint image, a backlight-system fault is likely. No sound, no picture and no standby light points to a power problem instead.
How we researched this guide
This guide draws on Samsung’s support article on TVs with no picture or a black screen, reviewed on November 17, 2026. The flashlight check is a common repair technique, not a manufacturer instruction. We did not test these steps on a device. Menus and diagnostic tools vary by TV brand, model and year.

Louis Mugan writes how-to and troubleshooting guides for EasyTechLife, covering Android phones, iPhones, laptops, Chromebooks, headphones and everyday software.
He aims to base each guide on official manufacturer documentation and support pages, and to link the sources so readers can check the steps for themselves. Questions or corrections? Use the contact page.


