No Sound From Your TV Over HDMI? How to Fix It

The picture from your cable box, console or laptop looks perfect, but the TV is silent. HDMI carries both picture and sound, so a TV that shows video without audio may have an incorrect sound setting, an incompatible audio format, a connection problem or a hardware fault.

Quick answer: When there’s picture but no sound over HDMI, check the volume and mute on both the TV and the source device, then make sure the TV’s sound output is set to its own speakers (or to your soundbar, if you use one). If it’s still silent, change the source device’s audio format to PCM or Stereo, reseat the HDMI cable, and restart both devices by unplugging them for a minute.

Turned-on flat-screen television
Photo by Glenn Carstens-Peters on Unsplash

First, find out where the problem is

  • Do the TV’s own apps have sound? If the TV’s built-in apps, such as Netflix or YouTube, are also silent, check the TV’s volume, sound output setting and speakers before focusing on the HDMI connection.
  • Is only one device silent? Then look at that device’s audio settings and its cable.
  • Is every HDMI device silent, but TV apps are fine? Suspect the TV’s HDMI audio settings.

Many TVs also have a built-in test. On Samsung, for example, the manual lists Settings > Support > Device Care > Self Diagnosis > Sound Test. If the test melody plays through the TV’s speakers, they can produce sound. Next, check the selected sound output, the HDMI input settings and the connected device.

Fixes to try, in order

1. Check volume and mute on both devices

Turn up the TV, then check the source. Cable boxes, streaming sticks and laptops have their own volume and mute, and a muted source sends silence no matter how loud the TV is.

2. Set the TV’s sound output

If the TV is trying to send sound to a soundbar, receiver or Bluetooth headphones that aren’t on, you’ll hear nothing. Open the TV’s sound settings and set the output to the TV’s speakers. On Samsung this is Settings > Sound > Sound Output > TV Speaker. Other brands call it Audio Output or Speakers.

3. Change the source device’s audio format to PCM or Stereo

Some devices send surround formats such as Dolby Digital Plus or DTS that the TV can’t decode, and the result is silence. In the source device’s audio settings, temporarily select PCM or Stereo, if available, to check whether an unsupported surround-sound format is causing the problem. This may turn off surround sound while you test, so switch back once you’ve found the cause. On a Roku streaming player, open Settings > Audio and check the available audio output options. On compatible Roku TV models, you may find PCM-Stereo under the digital audio output settings. Menu paths and options vary by model. On consoles and Blu-ray players, the option is usually under Sound or Audio Output.

Some TVs have a matching setting for the HDMI input. Samsung’s guide to changing the audio format describes an HDMI Input Audio Format option under Settings > Sound > Expert Settings, with PCM as the choice for audio played through the TV’s speakers. These Samsung settings and menu paths are available only on certain models and software versions.

4. Reseat or swap the HDMI cable and port

Unplug the cable at both ends and push it back in firmly. Then try a different HDMI port on the TV and, if you have one, a different cable. Test the cable on another TV if you can.

5. Power cycle everything

Turn off the TV and the source, unplug both from the wall, wait 60 seconds, and plug them back in. Restarting both devices can clear temporary HDMI connection or audio-negotiation problems.

6. Update or reset

Check for software updates on the TV and the connected device. If your TV offers a Reset Sound option, try it after the other steps; it may restore customized audio settings to their defaults. Avoid a full factory reset unless the manufacturer’s instructions specifically recommend one.

If you use a soundbar or AV receiver

  • Use the right port. For the TV to send its sound back to a soundbar over HDMI, connect the soundbar to the TV’s port labeled ARC or eARC. If your devices plug into the soundbar instead, the soundbar’s own input setting matters more.
  • Tell the TV to use it. Set the TV’s sound output to the soundbar or receiver.
  • Turn on HDMI control. This is called Anynet+ on Samsung, BRAVIA Sync on Sony and Simplink on LG.
  • Check the digital output format. Samsung notes that if this is set to Pass-through and the soundbar doesn’t support the incoming format, there’s no sound, and recommends Auto. Sony’s ARC troubleshooting article suggests switching the TV’s digital audio output to PCM.

If the source is a Windows PC or laptop

Windows often keeps playing sound through the laptop’s own speakers. Microsoft’s audio troubleshooting guide says to pick the output device yourself:

  1. Select Start > Settings > System > Sound.
  2. Under Output, choose your TV or the HDMI device.
  3. Play something and raise the volume in Windows and on the TV.

If the TV isn’t listed, reconnect the HDMI cable and check for graphics and HDMI audio driver updates through Windows Update or your computer manufacturer’s website. On a Mac, go to System Settings > Sound > Output and choose the TV. Two more things to know: a monitor without speakers can’t play sound even when it’s selected, and DVI-to-HDMI connections often carry video without audio, although some hardware supports it.

If your Fire TV Stick has other playback or connection issues, see our guide to fixing Fire Stick problems.

Frequently asked questions

How do I get my TV to play sound through HDMI?

Set the TV’s sound output to its speakers, unmute the source device, and set the source’s audio format to PCM or Stereo.

Why is there no sound when I connect my laptop to an HDMI monitor?

Your computer may still be sending audio to its built-in speakers. Open its sound settings and select the HDMI monitor as the output device. Also check whether the monitor has built-in speakers or a headphone or audio-out jack.

Why is my TV playing but there’s no sound?

The most common causes are a muted source, the TV sending sound to a disconnected audio device, or an audio format the TV can’t decode.

How do I reset an HDMI port on my TV?

There’s no reset button for a single port. Unplug the HDMI cable, unplug the TV from power for 60 seconds, then reconnect everything.

Can a bad HDMI cable cause no sound but a good picture?

It can, though it’s less common than a settings problem. Swapping the cable is a quick way to rule it out.

Why does sound work on some apps but not others?

Different apps and videos can use different audio formats. If only certain content is silent, check the device’s audio settings and try PCM or Stereo output to test for a format compatibility problem.

How we researched this guide

We researched this guide using support documentation from Samsung, Sony, Roku and Microsoft, reviewed on November 15, 2026. Menu paths vary by device and software version. We did not test the troubleshooting steps on physical TVs, HDMI devices or soundbars; the recommendations are based on manufacturer documentation.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top