Surface Screen Flickering or Scrambled? How to Fix It

A Surface screen that flickers, shakes, shows static or scrambles into a jumble of lines is hard to use and worrying to look at. The good news is that many cases come from display settings or drivers rather than a broken screen.

Quick answer: First, test the screen outside Windows by opening the Surface UEFI menu: turn the Surface off, then hold Volume up while you press and release Power. If the screen looks normal in UEFI, the cause is most likely in Windows. Turn off adaptive brightness, change Intel display power-saving settings, force a restart, then reinstall the display drivers and update Windows. If the screen also flickers in UEFI, it’s likely hardware and needs service.

Tablet with a detachable keyboard on a white table

This guide is part of our series on fixing TV and monitor screen problems.

Software or hardware? Test in UEFI first

UEFI is the Surface’s firmware screen. It loads before Windows, so it tells you whether Windows is involved.

  1. Shut down your Surface and wait about 10 seconds.
  2. Press and hold the Volume up button.
  3. While holding Volume up, press and release the Power button.
  4. Keep holding Volume up until the UEFI screen appears, then release it.
Result in UEFIWhat it meansWhat to do
Screen looks normalMost likely software, settings or drivers (an intermittent hardware fault is still possible)Work through Fixes 1–6
Screen still flickers, scrambles or shows linesLikely a hardware faultSkip to Fix 7

To leave UEFI, choose Restart now or Exit from the menu.

Is it one app or the whole screen?

Press Ctrl + Shift + Esc to open Task Manager. If Task Manager flickers along with the screen, the display driver is a likely cause. If Task Manager stays stable while the rest of the screen flickers, an incompatible app is more likely, so update or uninstall recently added apps.

Fix 1: Turn off content-based brightness

Surface devices can change screen brightness and contrast to match what’s on screen. That can look like flickering when content changes.

  • Windows 11: go to Settings > System > Display > Brightness and set Change brightness based on content to Off.
  • Windows 10: select the battery icon in the taskbar and move the slider to Best performance. Note that standard Windows 10 support ended on October 14, 2025.

Plugging your Surface into power also temporarily turns this feature off.

Fix 2: Turn off Intel display power saving

On Surface models with Intel processors, power-saving features in the Intel graphics software can cause flicker. To check your processor, open the Surface app, expand Device information and select View more.

  1. Install Intel Graphics Command Center from the Microsoft Store and open it.
  2. Select System, then Power.
  3. Set Display Power Savings to Off.
  4. If the flicker continues, also set Panel Self Refresh to Off.

Available graphics settings vary by Surface model and driver version. These settings save battery, so you may get slightly shorter battery life with them off.

Fix 3: Change your power mode

In Windows 11, open Settings > System > Power & battery. Apply any suggestions under Energy recommendations, then set Power mode to Better performance or Best performance. Running on battery in a power-saving mode can make display problems more likely, so test while plugged in too.

Fix 4: Force a restart

Save any open work first if you can. A quick first step is Windows + Ctrl + Shift + B, which restarts the graphics driver; the screen may go black or flicker briefly, and you may hear a beep. If that doesn’t help, do a full forced restart:

  1. Select Start > Power > Shut down and wait for the Surface to turn off.
  2. Press and hold the Power button for 20 seconds. If the logo appears, keep holding until it appears again and the full 20 seconds pass.
  3. Release the button and turn the Surface back on normally.

The 20-second method applies to most recent Surface models. Some older models use a different button combination, so check your model’s instructions if it doesn’t work.

Surface Pro 7 owners: some flickering on this model improves after the device is fully shut down (not asleep) for an extended time, such as 48 hours or a weekend. If that helps, shut it down completely at least one night a week.

Fix 5: Reinstall the display drivers and update Windows

If the flicker started right after an update, try rolling back first: in Device Manager > Display adapters, right-click the adapter, choose Properties > Driver > Roll Back Driver if it’s available, and restart.

Try updating the display driver through Windows Update first. If updating and rolling back don’t help, reinstall the drivers as below. Windows reinstalls them after you restart and run Windows Update, but this isn’t guaranteed on every setup.

Important: don’t do the steps below on a Surface Pro X. Uninstalling drivers on that model can leave a full system reset as the only way to restore them.

  1. Right-click Start and open Device Manager.
  2. Expand Monitors. Right-click the Surface panel entry (it may be called Surface Display or Surface Calibrated Panel), choose Uninstall device, tick Attempt to remove the driver for this device if shown, and select Uninstall.
  3. Expand Display adapters and do the same for each adapter listed, such as Intel or NVIDIA.
  4. Restart your Surface.
  5. Go to Settings > Windows Update, select Check for updates and install everything, including optional driver updates.

You can also open the Surface app and check under Help & support that your device is up to date.

Fix 6: Reset your Surface

If the screen still misbehaves in Windows but looks fine in UEFI, a reset can clear deeper software problems. Back up your files first, and save your BitLocker recovery key if your drive is encrypted. Then go to Settings > System > Recovery > Reset this PC. Keep my files removes installed apps and settings; Remove everything also deletes your personal files. A Surface USB recovery drive restores factory software and drivers, but it erases the device.

Fix 7: Get the screen serviced

If the screen flickers or scrambles in UEFI, or the problem survives a reset, it’s most likely hardware. Check your warranty in the Surface app, then use Microsoft’s service options: send the device in, visit an authorized service provider where available, or use official self-repair parts and guides if you’re experienced with repairs.

For other kinds of flicker, see our guide to monitor screen flickering.

Frequently asked questions

Why is my Surface screen flickering all of a sudden?

Common causes include content-based brightness, display power-saving settings, an app, a recent driver or Windows update, or a hardware fault. Testing the screen in UEFI helps show whether Windows is involved.

How do I fix a scrambled Surface Pro screen?

Force a restart, then check the screen in UEFI. If it’s fine there, reinstall the display drivers and update Windows. If it’s scrambled in UEFI too, the screen or its connection likely needs repair.

How much does it cost to fix a Surface Pro screen?

It depends on the model, your warranty and whether the damage is covered. Check your device’s warranty in the Surface app and get a quote from Microsoft or an authorized service provider before paying for a repair.

What is the lifespan of a Surface Pro?

There’s no fixed lifespan. It depends on how the device is used and cared for, battery health and how long the model keeps getting Windows and driver updates.

Can a Windows update cause Surface screen flicker?

Yes. A new display driver can sometimes cause flicker. Reinstalling the drivers and installing the latest updates usually brings a working driver back.

How we researched this guide

This guide was reviewed on November 18, 2026, using Microsoft’s current Surface display troubleshooting steps for Windows 11 and Windows 10. We did not test these steps on a device. Menu names and button layouts can vary by Surface model and Windows version.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top